MAT-772 |
Applied Math
|
3 credits |
$675.00 |
or |
This course is designed to present basic facts of arithmetic including whole numbers, fractions, decimals, powers, roots, English and metric measurement, ratio-proportion, percents, introduction to algebra, introduction to geometry, and applied statistics. Instruction includes use of scientific hand-held calculators and emphasis placed on critical thinking, problem solving skills.
Lecture Hours: 48
|
|
WEL-228 |
Introduction to Welding, Safety, and Health of Welders: SENSE1
|
1 credits |
$225.00 |
|
Provides students with orientation to the welding profession and will cover the basics of safety and health within the welding profession. This course aligns to SENSE Level 1, Module 1 and Module 2 – Key Indicators 1-6.
Lecture Hours: 16
|
|
WEL-233 |
Print Reading and Welding Symbol Interpretation: SENSE1
|
3 credits |
$675.00 |
|
Provides instruction in interpreting elements of welding prints (drawings or sketches), focusing on measurement, American Welding Society welding symbols, and fabrication requirements. Students will demonstrate how to prepare, assemble and tack weld parts according to drawings or sketches, using proper materials and tools. This course aligns to SENSE Level 1 Module 3: Drawing and Welding Symbol Interpretation, Key Indicators 1 and 2.
Lecture Hours: 48
|
|
WEL-245 |
Gas Metal Arc Welding Spray Transfer: SENSE1
|
2 credits |
$465.00 |
|
Focuses on proper weld safety, machine setup and welding techniques of Gas Metal Arc Welding Spray Transfer. Students perform American Welding Society compliant welds on carbon steel in flat and horizontal positions. This course will prepare students to take an AWS welder certification test, which is recommended for its successful completion. It aligns with SENSE Level 1 Module 5 Key Indicators 1, 2 and 8-12, as well as Module 2 - Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.
Lecture Hours: 16
Lab Hours: 32
Pre/Co-requisite(s): A minimum grade of C- in WEL-228.
|
|
WEL-262 |
Thermal Cutting Processes I - Manual and Mechanized OxyFuel Cutting: SENSE1
|
2 credits |
$555.00 |
|
Focuses on proper safety, equipment setup and cutting techniques for manual and mechanized OxyFuel cutting on carbon steel. Students perform American Welding Society compliant cutting operations in the flat position. The student will also perform scarfing and gouging operations to remove base and weld metal in flat and horizontal positions on carbon steel. This course aligns to SENSE Level 1 Module 8 - Units 1 and 2, as well as Module 2 - Key Indicator 7 and Module 9 – Key Indicator 1.
Lecture Hours: 16
Lab Hours: 32
Pre/Co-requisite(s): A minimum grade of C- in WEL-228.
|
|
WEL-263 |
Thermal Cutting Processes II - Plasma and Carbon Steel Arc: SENSE1
|
2 credits |
$570.00 |
|
Focuses on proper safety, equipment setup and cutting techniques for Plasma and Carbon steel Arc cutting on carbon steel, austenitic stainless steel, and aluminum. Students perform American Welding Society compliant cutting operations in the flat position. The student will also perform scarfing and gouging operations to remove base and weld metal in flat and horizontal positions. This course aligns to SENSE Level 1 Module 8 - Units 3 and 4, as well as Module 2 - Key Indicator 7 and Module 9 – Key Indicator 1.
Lecture Hours: 16
Lab Hours: 32
Pre/Co-requisite(s): A minimum grade of C- in WEL-228.
|
|
WEL-274 |
Shielded Metal Arc Welding I: SENSE1
|
3 credits |
$1355.00 |
|
Focuses on safety, amperage settings, polarity and the proper selection of electrodes for the shielded metal arc welding process. Students will perform American Welding Society compliant welds on carbon steel, using visual and destructive methods for determining weld quality. This course aligns to SENSE Level 1 Module 4 - Key Indicators 1-7 for the flat and horizontal positions, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.
Lecture Hours: 16
Lab Hours: 64
Pre/Co-requisite(s): A minimum grade of C- in WEL-228.
|
|
WEL-346 |
GMAW Developmental I
|
2 credits |
$450.00 |
|
This lab course will supplement content from Gas Metal Arc Welding (GMAW) I. Students will have the opportunity to further develop the skills for spray transfer welding including, but not limited to, manipulation of electrodes, determining changes in operating variables and applying welding methods to the five basic joints.
Lab Hours: 64
Prerequisite(s): Minimum grade of C- in WEL-228.
Co-requisite(s): Minimum grade of C- in WEL-245.
|
|
WEL-374 |
SMAW Developmental I
|
2 credits |
$665.00 |
|
This lab course will be a continuance of Shielded Metal Arc Welding methods. Students will perform within compliance of American Welding Society codes, standards and regulations.
Lab Hours: 64
Co-requisite(s): WEL-274.
|
|