Advanced Manufacturing Welding Courses

This course is designed to present basic facts of arithmetic including whole numbers, fractions, decimals, powers, roots, English and metric measurement, ratio-proportion, percents, introduction to algebra, and introduction to geometry. Instruction includes use of scientific hand-held calculators and emphasis placed on critical thinking, problem solving skills.

Lecture Hours: 48

This is a one semester, liberal arts mathematics course that satisfies the minimum general education requirement for math. The course is designed to impart math skills which are helpful in everyday life as well as to expose students to areas of mathematics they may not have seen before. Topics include problem-solving skills, set theory, algebra, consumer mathematics, probability, and statistics. Other topics may be included.

Lecture Hours: 48

Prerequisite(s): A minimum grade of D- in MAT-063 or appropriate placement score.

This course is a study of descriptive statistics including graphical representation, central tendency, correlation and regression, intuitive treatment of probability and inferential statistics including hypothesis testing.

Lecture Hours: 48

Prerequisite(s): MAT-063.

Provides students with orientation to the welding profession and will cover the basics of safety and health within the welding profession. This course aligns to SENSE Level 1, Module 1 and Module 2 – Key Indicators 1-6.

Lecture Hours: 16

Provides instruction in interpreting elements of welding prints (drawings or sketches), focusing on measurement, American Welding Society welding symbols, and fabrication requirements. Students will demonstrate how to prepare, assemble and tack weld parts according to drawings or sketches, using proper materials and tools. This course aligns to SENSE Level 1 Module 3: Drawing and Welding Symbol Interpretation, Key Indicators 1 and 2.

Lecture Hours: 48

Focuses on proper weld safety, machine setup and welding techniques of Gas Metal Arc Welding Spray Transfer. Students perform American Welding Society compliant welds on carbon steel in flat and horizontal positions. This course will prepare students to take an AWS welder certification test, which is recommended for its successful completion. It aligns with SENSE Level 1 Module 5 Key Indicators 1, 2 and 8-12, as well as Module 2 - Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 16 Lab Hours: 32

Pre/Co-requisite(s): A minimum grade of C- in WEL-228.

Focuses on proper safety, equipment setup and cutting techniques for manual and mechanized OxyFuel cutting on carbon steel. Students perform American Welding Society compliant cutting operations in the flat position. The student will also perform scarfing and gouging operations to remove base and weld metal in flat and horizontal positions on carbon steel. This course aligns to SENSE Level 1 Module 8 - Units 1 and 2, as well as Module 2 - Key Indicator 7 and Module 9 – Key Indicator 1.

Lecture Hours: 16 Lab Hours: 32

Pre/Co-requisite(s): A minimum grade of C- in WEL-228.

Focuses on proper safety, equipment setup and cutting techniques for Plasma and Carbon steel Arc cutting on carbon steel, austenitic stainless steel, and aluminum. Students perform American Welding Society compliant cutting operations in the flat position. The student will also perform scarfing and gouging operations to remove base and weld metal in flat and horizontal positions. This course aligns to SENSE Level 1 Module 8 - Units 3 and 4, as well as Module 2 - Key Indicator 7 and Module 9 – Key Indicator 1.

Lecture Hours: 16 Lab Hours: 32

Pre/Co-requisite(s): A minimum grade of C- in WEL-228.

Focuses on safety, amperage settings, polarity and the proper selection of electrodes for the shielded metal arc welding process. Students will perform American Welding Society compliant welds on carbon steel, using visual and destructive methods for determining weld quality. This course aligns to SENSE Level 1 Module 4 - Key Indicators 1-7 for the flat and horizontal positions, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 16 Lab Hours: 64

Pre/Co-requisite(s): A minimum grade of C- in WEL-228.

This lab course will supplement content from Gas Metal Arc Welding II. Students will have the opportunity to further develop the skills for spray transfer welding including, but not limited to, manipulation of electrodes, determining changes in operating variables and applying welding methods to the five basic joints.

Lecture Hours: 0 Lab Hours: 64

Co-requisite(s): WEL-245.

This lab course will be a continuance of Shielded Metal Arc Welding methods. Students will perform within compliance of American Welding Society codes, standards and regulations.

Lecture Hours: 0 Lab Hours: 64

Co-requisite(s): WEL-274.

Human Relations is the study of self and social behavior. Emphasis is placed on the understanding and application of social science theories and research for the development of effective interpersonal and organizational relationships.

Lecture Hours: 48

This course provides an introduction to the study of behavior with emphasis in the areas of learning, cognition, motivation, personality, behavioral disorder, therapy, and social influence. An understanding of the impact of both theoretical perspectives and experimental evidence on the formulation of the science of human behavior is also stressed. Psychological theories and principles are utilized to explain and predict behavior.

Lecture Hours: 48

This course surveys the basic principles, concepts, and research findings of social life from small groups to societies. The course examines a range of sociological explanations for the various forms of social behaviors and establishes a basis for reflection and further study in the field.

Lecture Hours: 48

Focuses on proper weld safety, machine setup and welding techniques of Gas Metal Arc Welding Short-Circuiting Transfer. Students perform American Welding Society compliant welds on carbon steel, in flat, horizontal, vertical and overhead positions. This course will prepare students to take an AWS welder certification test, which is recommended for its successful completion. This course aligns with SENSE Level 1 Module 5: Gas Metal Arc Welding Key Indicators 1-7. Also aligns to SENSE Level 3, Drawing and Welding Symbol Interpretation, Key Indicator 3.

Lecture Hours: 16 Lab Hours: 32

Prerequisite(s): A minimum grade of C- in WEL-228.

Focuses on safety, amperage settings, polarity and the proper selection of electrodes for the Shielded Metal Arc Welding (informally known as stick welding) process. Students perform American Welding Society complaint welds on carbon steel, in vertical up and overhead configurations, using visual and destructive methods for determining weld quality. This course aligns to SENSE Level 1 Module 4: Shielded Metal Arc Welding Key Indicators 1-7 for the flat and horizontal positions, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 16 Lab Hours: 64

Prerequisite(s): A minimum grade of C- in WEL-228.

Pre/Co-requisite(s): A minimum grade of C- in WEL-274.

Focuses on proper weld safety, machine setup and welding techniques for Flux Cored Arc Welding Self-Shielded. Students perform American Welding Society compliant welds on carbon steel in flat, horizontal, vertical and overhead positions. This course will prepare students to take an AWS welder certification test, which is recommended for its successful completion. It aligns to SENSE Level 1 Module 6 - Key Indicators 1, 2 and 8-12, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 16 Lab Hours: 32

Prerequisite(s): A minimum grade of C- in WEL-288 and WEL-245.

Focuses on proper weld safety, machine setup and welding techniques for Flux Cored Arc Welding (Gas Shielded). Students perform American Welding Society compliant welds on carbon steel in flat, horizontal, vertical and overhead positions. This course will prepare students to take an AWS welder certification test, which is recommended for its successful completion. It aligns to SENSE Level 1, Module 6 - Key Indicators 1-7, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 16 Lab Hours: 32

Prerequisite(s): A minimum grade of C- in WEL-228 and WEL-245.

This lab course will be a continuance of Gas Metal Arc Welding methods. Students will perform within compliance of American Welding Society codes, standards and regulations.

Lecture Hours: 0 Lab Hours: 64

Co-requisite(s): WEL-244.

This lab course will supplement content from Shielded Metal Arc Welding II. Students will have the opportunity to further develop the skills for out of position welding including, but not limited to, manipulation of electrodes, determining changes in operating variables and applying welding methods to the five basic joints.

Lecture Hours: 0 Lab Hours: 64

Co-requisite(s): WEL-275.

This course presents elements of the oral communications process with emphasis on developing interpersonal, small group, and public speaking skills. Students will be involved in activities that provide opportunity for the understanding and improvement of their oral communication skills.

Lecture Hours: 48

Focuses on proper weld safety, machine setup and welding techniques for Gas Tungsten Arc Welding. Students perform American Welding Society compliant welds on carbon steel in flat, horizontal, vertical and overhead positions. This course will prepare students to take an AWS welder certification test, which is recommended for successful completion of this course. This course aligns to SENSE Level 1, Module 7 – Key Indicators 1-7, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 16 Lab Hours: 32

Prerequisite(s): A minimum grade of C- in WEL-228.

Co-requisite(s): A minimum grade of C- in WEL-252 and WEL-253.

Focuses on proper weld safety, machine setup and welding techniques for gas tungsten arc welding. Students perform American Welding Society compliant welds on aluminum in flat and horizontal positions. This course will prepare students to take an AWS welder certification test, which is recommended for successful completion of this course. This course aligns to SENSE Level I, Module 7 Key Indicators 1, 2 and 13 – 17, as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 0 Lab Hours: 32

Prerequisite(s): A minimum grade of WEL-228.

Co-requisite(s): A minimum grade of C- in WEL-251 and WEL-253.

This course focuses on proper weld safety, machine setup and welding techniques for Gas Tungsten Arc Welding. Students perform American Welding Society compliant welds on austenitic stainless steel in flat, horizontal, and vertical positions. This course will prepare students to take an AWS welder certification test, which is recommended for successful completion of this course. This course aligns to SENSE Level I, Module 7 Key Indicators 1, 2 and 8-12 as well as Module 2 - Key Indicator 7, Module 3- Key Indicator 3, and Module 9 – Key Indicator 2.

Lecture Hours: 0 Lab Hours: 32

Prerequisite(s): A minimum grade of C- in WEL-228.

Co-requisite(s): A minimum grade of C- in WEL-251 and WEL-252.

Students will visually examine test weldments and thermally cut surfaces per multiple welding codes, standards, and specifications. This course aligns to SENSE Level I, Module 9: Welding Inspection and Testing Principles.

Lecture Hours: 16

Prerequisite(s): A minimum grade of C- in WEL-233.

This course is an introduction to vertical down and vertical up pipe welding procedures and techniques. Topics include: safety, elements of the American Petroleum Institute Pipe Welding Code and the American Society of Mechanical Engineers Pipe Welding Code and the American Welding Society Structural Steel Pipe Welding Code.

Lecture Hours: 0 Lab Hours: 96

Prerequisite(s): A minimum grade of C- in WEL-275 and WEL-375.

This lab course will be a continuance of GTAW methods. Students will perform within AWS codes, standards and regulations.

Lecture Hours: 0 Lab Hours: 32

Co-requisite(s): WEL-251, WEL-252, and WEL-253.

This course will prepare the student for College Algebra and Trigonometry or other equivalent course work. Topics include properties of real numbers, linear and quadratic equations, graphs of polynomial functions, systems of equations, polynomial and rational expressions, inequalities, integral and rational exponents, radicals, and complex numbers.

Lecture Hours: 64

Prerequisite(s): A minimum grade of C- in MAT-063 or appropriate placement scores.

Begins a two semester sequence to prepare students for the calculus sequence. The central theme is the concept of functions, their properties, graphs and applications. Functions studied include polynomial, rational, exponential, and logarithmic functions.

Lecture Hours: 80

Prerequisite(s): MAT-102 or appropriate placement score.

This one-semester pre-calculus course is intended for the student with a solid algebra background who intends to take calculus. It is also beneficial (but not required) for the student to have a background in trigonometry. The course will emphasize functions using an analytical, numerical, and graphical approach. The student will study linear, polynomial, rational, exponential, logarithmic and trigonometric functions along with their applications.

Lecture Hours: 64

Prerequisite(s): Appropriate placement scores.

The second course of a two-semester pre-calculus sequence. Topics include trigonometry and applications, vectors, analytic geometry, and polar and parametric equations.

Lecture Hours: 48

Prerequisite(s): MAT-122 or equivalent placement score.

The first in a calculus sequence, this course covers topics including functions and their graphs, limits, derivatives, applications of the derivative, and integrals.

Lecture Hours: 64

Prerequisite(s): A minimum grade of C- in MAT-134 or MAT-128 or appropriate placement scores.

A continuation of MAT-210, this course covers topics including integration techniques, applications of integration, infinite series, conic sections, parametric and polar equations.

Lecture Hours: 64

Prerequisite(s): A minimum grade of C- in MAT-210.

This course covers topics including integration and differentiation techniques related to vectors, vector-valued functions, functions of several variables, multiple integration, and vector analysis.

Lecture Hours: 64

Prerequisite(s): MAT-216.