Suggested Sequence of Study
The following suggested sequence of study is for new full-time students starting the program Fall 2024.
When you’re ready to register for classes, visit Self-Service, Student Planning. This will show you your specific program requirements and how you’re doing so far.
Please note that course offerings and costs can change. See what’s included in the cost calculation.
Legend
- Course has a prerequisite and/or corequisite

- 8WK1 Course meets the first 8 weeks of the semester
- 8KW2 Course meets the second 8 weeks of the semester
Course Descriptions: Show All | Hide All
Semester 1
Course |
Note |
Credits |
Cost |
MFG-157 |
Introduction to CNC Programming I
In this course students will create basic programs for CNC mills. Student will use a plain ASCII text editor (like Notepad) to input basic industry standard G and M code programs. Programs are run on verification software to ensure accuracy. Speed and feed calculations, operator notes and start-up lines, mill tooling types and procedures, rectangular coordinates, canned (drill) cycles, and file management are other areas of study.
Lecture Hours: 32
|
8WK1 |
2 |
$450.00 |
MFG-158 |
Introduction to CNC Programming II
In this course students will create programs for CNC mills using cutter diameter compensation, sub-routines, and sub-programs. Students will also write start-up lines and basic level programs on CNC lathes. Students will use a plain ASCII text editor (like Notepad) to input basic industry standard G and M code programs. Programs are run on verification software to ensure accuracy. Lathe tooling, typical turning procedures, cutter nose radius compensation, and tip orientation are other areas of study.
Lecture Hours: 32
Pre/Co-requisite(s): A minimum grade of D in MFG-157 and MFG-302.
|
8WK2 |
2 |
$450.00 |
MAT-772 |
Applied Math
This course is designed to present basic facts of arithmetic including whole numbers, fractions, decimals, powers, roots, English and metric measurement, ratio-proportion, percents, introduction to algebra, introduction to geometry, and applied statistics. Instruction includes use of scientific hand-held calculators and emphasis placed on critical thinking, problem solving skills.
Lecture Hours: 48
Prerequisite(s): Assessment score required.
|
|
3 |
$675.00 |
MFG-122 |
Machine Trade Printreading I
This course provides the student with the necessary knowledge to read and interpret basic prints used in the machining industry. It covers terminology, line-types, and drawing interpretation. First and third angle orthographic projection, dimensioning methods, and tolerancing are the major topics covered.
Lecture Hours: 48
|
|
3 |
$675.00 |
MFG-211 |
Basic Machine Theory
This course presents basic machining processes and concepts necessary to set-up and operate machine shop equipment.
Lecture Hours: 32
|
|
2 |
$450.00 |
MFG-222 |
Machine Operations I
An introductory machining course presenting basic machining operations. Student will perform basic operations on lathes, horizontal + vertical-milling machines, drilling machines, saws, various types of grinders, and precision measuring equipment.
Lab Hours: 128
Pre/Co-requisite(s): A minimum grade of D in MFG-211.
|
|
4 |
$1727.00 |
MFG-302 |
CNC Fundamentals
Covers computer numerical control (CNC) as it relates to milling machines, lathes, and related software. Emphasis on machine set-up and operation, inspection of parts, and communication of peripherals.
Lab Hours: 96
|
|
3 |
$878.00 |
Total Credits: 19
Total Tuition + Course Fees: $5,305.00
Remaining course fees after the Last-Dollar Scholarship is applied: $1,030.00
Semester 2
Course |
Note |
Credits |
Cost |
COM-781 |
Written Communication in the Workplace
|
|
3 |
$675.00 |
or ENG-105 |
Composition I
Composition I emphasizes fluency, thesis-driven organization, the use of supporting details, and research techniques. Writing is approached as a recursive process that includes prewriting strategies, drafting, revising, and editing. The course helps students shape writing to serve readers' needs and define a sense of purpose in their writing. It also gives students strategies for reading college-level material.
Lecture Hours: 48
Prerequisite(s): Appropriate placement score or equivalent.
|
|
3 |
$675.00 |
MFG-142 |
Geometric Dimensioning Tolerancing
This course introduces the student to the use of Geometric Dimensioning and Tolerancing. It consists primarily learning the names , meanings and application of the symbols used on engineering drawings that include GD&T.
Lecture Hours: 48
Prerequisite(s): MFG-122 or equivalent print reading skills as determined by the instructor.
|
|
3 |
$675.00 |
MFG-214 |
Advanced Machine Theory
Learn advanced machining processes and concepts used while operating machine shop equipment.
Lecture Hours: 32
|
|
2 |
$450.00 |
MFG-228 |
Machine Operations II
This is an advanced hands-on machining course.
Co-op Hours: 128
|
|
4 |
$1009.00 |
MFG-309 |
CNC Programming Theory II
This course teaches mid-level CNC programming including canned/auto cycles, cutter compensation, and using subroutine + sub-programs. Machine capabilities such as mirror imaging, axis rotation, and part size scaling will be discussed. Students will draw basic part prints on our CAD/CAM software. Prints will be dimensioned and part drawings will be extruded into solids.
Lecture Hours: 64
Prerequisite(s): Minimum grade of D in MFG-157 and MFG-158.
Co-requisite(s): MFG-335
|
|
4 |
$900.00 |
MFG-335 |
CNC Operations
This course is similar to CNC Fundamentals except students will run Hawkeye's CNC lathes and machining centers individually, rather than in groups to prove individual understanding of CNC machine operation. Manual equipment will be utilized to perform secondary operations. Manual and CMM inspection equipment will also be experienced. Students will back-plot, set-up, and run unproven programs to ensure the student can find and correct CNC program errors.
Lab Hours: 96
Prerequisite(s): Minimum grade of D- in MFG-157, and MFG-158, and MFG-302.
|
|
3 |
$822.00 |
Total Credits: 19
Total Tuition + Course Fees: $4,531.00
Remaining course fees after the Last-Dollar Scholarship is applied: $256.00
Semester 3 — Summer
Course |
Note |
Credits |
Cost |
MFG-320 |
Computer Aided Machining
Computer-Aided Machining provides an opportunity to study all steps in the computer-aided design and computer-aided manufacturing processes. This includes drawing, dimensioning, creating solids, creating tool-paths, back-plotting, and program correction. Students utilize CAD/CAM software in creating and running functional CNC programs.
Lecture Hours: 32
Lab Hours: 32
|
|
3 |
$675.00 |
MFG-364 |
Hydraulic Jigs and Fixtures
A course in building using blueprints, knowledge and skills developed in basic machine concepts and operations. Students are required to build and run jigs and fixtures working within the tolerance of the print.
Lecture Hours: 16
Lab Hours: 96
Prerequisite(s): Minimum grade of D in MFG-214 and MFG-228.
|
|
4 |
$1162.00 |
MFG-380 |
EDM Fundamentals
This course covers the basics of wire and ram type EDMing. Classroom instruction includes the theory and fundamentals of EDMing, wire and electrode materials, the role of deionized water and dielectric fluids, power supplies, computer numerical control (CNC) EDM. Lab work consists of fabrication of electrodes and setup and operation of EDM machine tools.
Lecture Hours: 16
Lab Hours: 32
|
|
2 |
$450.00 |
Total Credits: 9
Total Tuition + Course Fees: $2,287.00
Remaining course fees after the Last-Dollar Scholarship is applied: $262.00
Semester 4
Course |
Note |
Credits |
Cost |
MFG-408 |
Basic Diemaking
This is a course in basic tool and die theory, building procedures and techniques. Units of instruction include principles of piercing, blanking and bending as well as die terminology and construction applications.
Lecture Hours: 32
Lab Hours: 192
Prerequisite(s): Minimum grade of D in MFG-214, and MFG-228, and MFG-364.
Pre/Co-requisite(s): Minimum grade of D in MFG-410.
|
|
8 |
$2301.00 |
MFG-410 |
CAD Die Design
This course is the study of die assembly prints correlated with work sequencing and procedures used to efficiently produce and assemble dies. Activities include the use of CAD software to derive design information needed to build components in the die for a variety of die designs. The course will develop student skill in using assembly print information to plan the build process for various types of stamping dies.
Lecture Hours: 16
Lab Hours: 64
|
|
3 |
$675.00 |
SPC-101 |
Fundamentals of Oral Communication
This course introduces students to the oral communication process and how it affects human interaction There will be an emphasis on developing interpersonal, small group, and public speaking skills. Students will be involved in activities that provide opportunity for the understanding and improvement of their oral communication skills.
Lecture Hours: 48
|
|
3 |
$675.00 |
WEL-402 |
Tool Steel Welding and Heat Treatment
This course is an introduction to the fundamental operations of selecting, welding and heat treating tool steels. Classroom and shop instruction is given in welding safety, welding equipment, selection and manipulation of electrodes and the procedures in welding alloy and tool steels It will cover steel selection and basic heat treatment. Lab and class emphasis is on the changes that happen when steel is heated and cooled by welding as well as heat treating.
Lecture Hours: 16
Lab Hours: 32
|
|
2 |
$663.00 |
Total Credits: 16
Total Tuition + Course Fees: $4,314.00
Remaining course fees after the Last-Dollar Scholarship is applied: $714.00
Semester 5
Course |
Note |
Credits |
Cost |
MFG-107 |
Introduction to 3D Modeling
This course will introduce students to designing parts using AutoCAD Inventor software in addition to digitizer and 3-D printer technology. The course includes a basic overview of 3-D software capabilities applied to tooling design and precise machined parts.
Lecture Hours: 16
Lab Hours: 64
|
|
3 |
$732.00 |
MFG-431 |
Die Revision and Repair
This course will train students on common maintenance, repair and revision techniques performed on manufacturing tooling such as stamping dies, injection molds, fixtures and jigs. The student will also learn about the maintenance schedule for manufacturing tools, the function and installation of safety sensors, secondary operation components, and gage and inspection components in production tooling.
Lecture Hours: 16
Lab Hours: 128
Prerequisite(s): Minimum grade of D in MFG-408.
|
|
5 |
$1268.00 |
MFG-452 |
Moldmaking
The student is presented with the basic fundamentals of plastic mold construction and molding processes. Experienced individuals may contact instructor to gain admittance to this course.
Lecture Hours: 16
Lab Hours: 64
Prerequisite(s): Minimum grade of D- in MFG-408.
|
|
3 |
$675.00 |
MFG-525 |
CMM Inspection and SPC
This course instructs the student on the capabilities and basic operation of a Coordinate Measuring Machine used in manufacturing to inspect precision machined parts. Students will also be introduced to using inspection data in the Statistical Process Control method of insuring quality production. SPC fundamentals and software applications will be introduced in this course.
Lecture Hours: 16
Lab Hours: 64
Prerequisite(s): Minimum grade of D in MFG-142.
|
|
3 |
$811.00 |
PSY-102 |
Human and Work Relations
Human Relations is the study of self and social behavior. Emphasis is placed on the understanding and application of social science theories and research for the development of effective interpersonal and organizational relationships.
Lecture Hours: 48
|
|
3 |
$675.00 |
or PSY-111 |
Introduction to Psychology
This course provides an introduction to the study of behavior and mental processes with emphasis in such areas as learning, cognition, motivation, personality, behavioral disorder, therapy, and social influence. An understanding of the impact of both theoretical perspectives and experimental evidence on the formulation of the science of human behavior is also stressed. Psychological theories and principles are utilized to explain and predict behavior.
Lecture Hours: 48
|
|
3 |
$675.00 |
or SOC-110 |
Introduction to Sociology
This course surveys the basic principles, concepts, and research findings of social life from small groups to societies. The course examines a range of sociological explanations for the various forms of social behaviors and establishes a basis for reflection and further study in the field.
Lecture Hours: 48
|
|
3 |
$675.00 |
Total Credits: 17
Total Tuition + Course Fees: $4,161.00
Remaining course fees after the Last-Dollar Scholarship is applied: $336.00
Math Electives
Course |
Note |
Credits |
Cost |
MAT-110 |
Math for Liberal Arts
This is a one semester, liberal arts mathematics course that satisfies the minimum general education requirement for math. The course is designed to impart math skills which are helpful in everyday life as well as to expose students to areas of mathematics they may not have seen before. Topics include problem-solving skills, set theory, algebra, consumer mathematics, probability, and statistics. Other topics may be included.
Lecture Hours: 48
Prerequisite(s): Minimum grade of D- in MAT-060 or MAT-063. Or equivalent placement score.
|
|
3 |
$675.00 |
MAT-121 |
College Algebra
This course provides an intensified study of algebraic techniques and prepares students for future study in mathematics. The central theme is the concept of functions, their properties, graphs and applications. Functions studied include polynomial, rational, exponential, and logarithmic.
Lecture Hours: 64
Prerequisite(s): Minimum grade of C- in MAT-102. Or equivalent placement score.
|
|
4 |
$900.00 |
MAT-128 |
Precalculus
This one-semester pre-calculus course is intended for the student with a solid algebra background who intends to take calculus. It is also beneficial (but not required) for the student to have a background in trigonometry. The course will emphasize functions using an analytical, numerical, and graphical approach. The student will study linear, polynomial, rational, exponential, logarithmic and trigonometric functions along with their applications.
Lecture Hours: 64
Prerequisite(s): Appropriate Placement Test Scores: ACT Math Score of 25 OR Compass Score of 51-100 in the College Algebra Domain or 31-50 in the Trigonometry Domain.
|
|
4 |
$900.00 |
MAT-134 |
Trigonometry and Analytic Geometry
The second course of a two-semester pre-calculus sequence. Topics include trigonometry and applications, vectors, analytic geometry, and polar and parametric equations.
Lecture Hours: 48
Prerequisite(s): Minimum grade of C- in MAT-121. Or equivalent placement score.
|
|
3 |
$675.00 |
MAT-156 |
Statistics
This course is a study of descriptive statistics including graphical representation, central tendency, correlation and regression, intuitive treatment of probability and inferential statistics including hypothesis testing.
Lecture Hours: 48
Prerequisite(s): Minimum grade of C- in MAT-060 or MAT-063. Or equivalent placement score.
|
|
3 |
$675.00 |
MAT-210 |
Calculus I
The first in a calculus sequence, this course covers topics including functions and their graphs, limits, derivatives, applications of the derivative, and integrals.
Lecture Hours: 64
Prerequisite(s): Minimum grade of C- in MAT-128 or MAT-134. Or appropriate placement scores: ACT 27; COMPASS TRIGONOMETRY 51-100.
|
|
4 |
$900.00 |
MAT-216 |
Calculus II
A continuation of MAT-210, this course covers topics including integration techniques, applications of integration, infinite series, conic sections, parametric and polar equations.
Lecture Hours: 64
Prerequisite(s): Minimum grade of C- in MAT-210.
|
|
4 |
$900.00 |
MAT-219 |
Calculus III
This course covers topics including integration and differentiation techniques related to vectors, vector-valued functions, functions of several variables, multiple integration, and vector analysis.
Lecture Hours: 64
Prerequisite(s): Minimum grade of C- in MAT-216
|
|
4 |
$900.00 |
Cost Calculations
The cost calculations are based on 2024–2025 resident tuition, fees, and any additional course fees. These are for informational purposes only and not a guarantee of what you'll be charged.
- Course Cost: The course cost is calculated by multiplying resident tuition and fees per credit hour by the number of credits for the course, then adding any applicable course fees.
- Total Tuition + Course Fees: This is the total tuition and course fees for all courses during the semester. If there are multiple courses that can fulfill the same requirement, we’ll use the first one listed for the calculation.
Additional Costs to Consider
When budgeting for your program, be sure to include the cost of books.
Keep in mind that some programs may have additional expenses, like tools, equipment, supplies, uniforms, exam fees, and background checks. Check with your faculty advisor for more details.